Husky Front Mud Flap Installation - 2012 Dodge Ram- Video

Today on our 2012 Dodge Ram Pickup, well be installing the Husky Custom-Molded Mud Flaps for the front wheels, part number HL56171. First well go ahead and remove the older manufacturer mud flap. There are a total of three fasteners to be removed; two on the inner wheel well and one underneath the rocker panel. Well hang onto the two screws on the inner wheel well, as well use them to install the new Husky mud flap. Now with the old one off, well go ahead and clean up the area and prepare to install the new one. With the area cleaned and dry, well go ahead and set the new mud flap into position using the old fasteners to line up the mud flap. more

Watch Video

3/22/2013 12:38:58 PM

Husky Rear Mud Flap Installation - 2012 Dodge Ram- Video

Today on our 2013 Dodge Ram Pickup well be installing the Husky Custom Molded Mud Flaps for the rear wheels, part number HL57151. For this application, there is a large molding that runs along the rear wheel well and fender that will need to be removed first. Then were ready to install our Husky Custom Molded Mud Flaps. For this application, its quite dirty so well need to clean it first using a soap and water solution and a wet rag well go ahead and thoroughly clean it and wait for it to dry. Then well take our mud flap and fit it into place using a pencil to mark the top edge. Next, well need to apply the applicator solution so that we can adhere the clear paint protective adhesive. more

Watch Video

3/15/2013 1:03:39 PM

DeeZee Rear Mud Flap Installation - 2003 Dodge Ram- Video

Today on a 2003 Dodge Ram 2500, were going to install part number DZ37910. These are the mud flaps for rear wheels. The first thing were going to do is go ahead and clean the fender wheel. Go back over again with some rubbing alcohol to make sure we have a good clean surface and well apply protective decal. Well go ahead and place the mud flap up to the fender wheel. Well make sure we have our decal on the right spot and allow it to dry. more

Watch Video

8/23/2012 7:44:40 AM

DeeZee Front Mud Flap Installation - 2003 Dodge Ram- Video

Today on a 2003 Dodge Ram 2500, were going to install part number DZ37909 from DeeZee. This is our mud flap for front wheels. First, what were going to do is go ahead and clean the fender wheel, go back over again with some rubbing alcohol to make sure you have a good clean surface, and well apply a protective decal. Well go ahead and place the mud flap up to the fender wheel. Well make sure we have our decal on the right spot and allow it to dry. After its dry, well go ahead and install the mud flap. more

Watch Video

8/23/2012 7:44:16 AM

WeatherTech Mud Flap Installation - 2009 Dodge Ram 1500- Video

Today on this 2009 Dodge Ram 1500 series pickup, we will be installing the WeatherTech mud flaps front and back, part number WT110024-120024. We are going to start our installation with the front mud flaps and we are going to start on the driver side. The first thing we want to do is go ahead and turn our front wheels all the way to the left to maximize the clearance between the tire and the fender well. Next we want to locate our mud flap. And on the back side you will see that they are marked L.H. for the left hand side and R.H. for the right hand side. We want the L.H. one for the driver side here. Before we get our installation started, we want to make sure that this area is nice and clean so that the grime does not build up in between our mud flap and our fender well. The mounting holes that we are going to be using for our mud flap are going to be this one here, into the existing hole here in the fender well. And we are actually going to remove this screw here from the bottom and reuse it to install the mud flap. 0:56 more

Watch Video

2/25/2010 5:19:34 AM

  1